• AMI lifts are typically delivered pre-assembled and packed in heavy transport resistant frame.
• To put on the hand the lift correctly is particularly difficult task. Therefore is strongly recommended that the lift is assembled, fixed on the floor and adjusted by specialists certified by producer.
• The building roof must be higher about 100mm than the total lifting height.
• AMI lifts can be fixed only on top quality concrete floor representing the high quality concrete (the minimum
  concrete quality mark C20/25 according to DIN 1045:2001-07) slab at: 230 mm alternative, on the foundation of the same concrete having the dimensions 1200 by 700 mm under each post and sunk to a minimum depth of 500 mm indoors and 800 mm outdoors.
• There must be an electricity line available at the site complying with the following specifications: TN-S 3/N/PE AC 400V/230V/50 Hz. This power line must be provided with the 16/3/B amperes contact breaker fuse complying with the characteristics of the electric motor of the lift.
• Power mains must be executed by a flexible cable type H05VV-F.
• The oil tank of the lift must be filled with the oil OHHM 32 (the level of filling can be checked through the transparent plastic tank). Tank capacity 8 l.

Product documentation